The following summarize of the problems frequently encountered, and I grouped into several categories and some examples of problems solution as well.
Striped printouts or color faded out yet
Possible cause:
There are air bubbles in the cartridge (possibility could be due to the current injection / cartridge refilling)
The possibility of a clogged print head by dry ink (could be due to rarely used)
Print head is damaged / scratched / position changed because of physical damage
wrong in the installation of the cartridge
There are running out of ink for a particular color or all
One of the settings in the computer
Sample solution:
Clean by way of cleaning head for 2-4 times to remove the air bubbles inside the cartridge (consult the printer according to the printer)
Replace assure catridenya correctly, turn off and turn back to meyakinakan setatus cartridge that has changed.
Replace the old cartridge / damaged
Keep right not to open the bottom seal movie though output striped out or not at all
Check back not sure when you print in draft print quality settings or super economy
Replace the old print head or damaged
Print is not out at all
Possible cause:
Many air bubbles in the cartridge
Printers and elderly (older) or damaged or closed part of his print head
Label color (yellow) is not discarded
Sample solution:
Clean by way of cleaning head for 2-4 times to remove the air bubbles inside the cartridge (consult the printer according to the printer)
Shake the cartridge a few times (3-4) before installing
Discard the yellow label so that air can flow normally to print
Keep right not to open the seal movie output walo striped bottom out or not at all
The printer does not recognize the new cartridge is installed
Possible cause:
Cartridge is not installed properly
Touching a small chip on the cartridge by hand or chip also the dirty / wet (chip is easily damaged)
Damage to most pathways (circuits on the cartridge)
Sample solution:
Replace assure catridenya correctly, turn off and turn back to meyakinakan setatus cartridge that has changed.
Use a clean, dry cloth to clean the chip when the chip is dirty
Checks if the path is broken rangkaiannnya
If it is not possible tuk repaired buy it new
Once installed a new cartridge there is a warning that the cartridge installed is not genuine
Possible cause:
A common message from the producer to the user : D
Sample solution:
This message just ignore it if you have questions answered wrote "yes" or intervenes on demand, this case does not affect the quality of the prints with the printer
After replacing the new cartridge, still remain out alerts "ink out"
Possible cause:
This can be caused because we replace the cartridge when the printer off position, so that the printer memory still remains in the previous state "ink out"
Sample solution:
Turn off the printer and right living, the process will resume printing : D
Exit message "waste ink absorber full tank" Troubleshoot network printer problems
Terima kasih telah membaca artikel tentang Troubleshoot network printer problems di blog Computer and Printer Solutions jika anda ingin menyebar luaskan artikel ini di mohon untuk mencantumkan link sebagai Sumbernya, dan bila artikel ini bermanfaat silakan bookmark halaman ini diwebbroswer anda, dengan cara menekan Ctrl + D pada tombol keyboard anda.