Kata Share | Mas Sehat | Ston SEO Responsif Blogger Template
» » » Addressing Indoor Air Hose Infusion Canon

Addressing Indoor Air Hose Infusion Canon

Canon , Printer
Wednesday, April 30, 2014
Belum ada komentar
Often we find Canon printer is having problems Infusion air trapped inside the IV. Of course this will not result in the smooth flow of ink from the infusion tube into  the cartridge . and consequently become perfect print results, eg printout dotted, striped, there are colors that do not come out, and so on.
Why Air can enter in the IV Canon?

air in the IV Canon caused by the existence of a gap between the hole the cartridge  and place the IV infusion of rubber that goes into the cartridge.Or more trivial, connection hose and  cartridge  "loose". This vulnerability occurs because the hole the cartridge  is not in accordance with the rubber, because when punching holes in  the cartridge only with solder / drill bit that does not match the diameter of the rubber and knee infusion. Consequently, the air will eventually get into the IV tube.

Figure 1. Kneel & Rubber  Cartridge
Figure 2. Place Air Intake Air Tools For Coping In Hose Infusion Canon:



    1. UHU Glue
Figure 3. Glue UHU
    1. Vacuum Toolkit C artridge  Canon
Figure 4. Vacuum Ink  Cartridges
How to Solve Indoor Air Hose Infusion Canon:
  1. Prepare UHU Glue (do not use glue ALTECO, can damage plastic)
  2. Take  the cartridge  and do not loose hose IV.
  3. Glue the edges of the hole  the cartridge  where the hose comes in, try not to air could enter.
  4. Allow the glue to dry first.
  5. Open Close breathing tube Infusion
  6. Prepare Toolkit C Vacuum artridge Canon, then Replace C artridge  to the Toolkit.
  7. Attach the syringe / injections without a needle into the rubber hole in the bottom of Vacuum Catrid Toolkit.
  8. Then suck the ink through the air in the hose is lost.
  9. The printer is Ready.
Figure 5. Glue UHU Glue to  Cartridge
Figure 6. Infusion After the Finish Line
Figure 7. Outstanding Vacuum Ink
Figure 8. Begin Using Vacuum Ink
Figure 9. Inks Once aspirated
Figure 10. Inks Once aspirated
Advice to avoid problems in the air enters the hose Infusion:
Use the appropriate infusion drill diameter rubber hose intravenous infusions of L places. This drill has a diameter of 3.6mm.
Figure 11. Screwdriver Drill For Cartridge Addressing Indoor Air Hose Infusion Canon
Terima kasih telah membaca artikel tentang Addressing Indoor Air Hose Infusion Canon di blog Computer and Printer Solutions jika anda ingin menyebar luaskan artikel ini di mohon untuk mencantumkan link sebagai Sumbernya, dan bila artikel ini bermanfaat silakan bookmark halaman ini diwebbroswer anda, dengan cara menekan Ctrl + D pada tombol keyboard anda.

Artikel terbaru :

Kata Share | Mas Sehat | Ston SEO Responsif Blogger Template